Barkly Rare Earths finds second route to high MREO extraction

Résumé détaillé
The calcination step used no acid or other reagents, with acid introduced only in the later leach. ... Read More The post Barkly Rare Earths finds second route to high MREO…
Barkly Rare Earths now has two high-extraction processing routes to assess. Pic: Getty Images
Special Report: Barkly Rare Earths has found a potential second route for processing its minerals, with dry calcination followed by acid leaching extracting up to 98% of magnet rare earth oxides in tests.
The calcination step used no acid or other reagents, with acid introduced only in the later leach.
Sulphuric acid leaching extracted 97% of the magnet rare earth oxides (MREO) from both calcined samples, while hydrochloric acid (HCl) leaching extracted 98%.
The HCl test also extracted 98% of total rare earth oxides (TREO), compared with 92-93% in the sulphuric acid tests, where less lanthanum and cerium reported to solution.
Barkly Rare Earths (ASX:BAK) is evaluating the method as a second high-extraction route alongside caustic conversion at its Northern Territory project.
“These tests were undertaken based on our detailed understanding of the mineralogy and they support our working hypothesis that calcination may offer an effective, simpler and lower-cost processing route than a traditional caustic conversion flowsheet,” managing director Craig Wright said.
“Avoiding acid handling and off-gas scrubbing around the thermal unit could potentially simplify plant design and operation, and offer safety and cost benefits.”
The Barkly Project in the Northern Territory hosts a 40Mt Inferred Mineral Resource grading 2,100ppm TREO, including 710ppm MREO, above a 430ppm neodymium-praseodymium oxide (NdPr) cut-off.
Début de l'article, extrait de Stockhead. Pour lire la suite, ouvrez l'article chez le média.
MarketNews présente le titre et le résumé publiés par le média. L'article complet se lit sur le site de l'éditeur. (stockhead.com.au)




